The Go Power! 600 watt pure sine wave power inverter takes 24 volt DC battery power and converts it to an exact replica of AC houshold power. The Go Power! pure sine wave power inverters are guaranteed to run any load within their wattage range. The Go Power! pure sine wave 600 watt power inverter has a 2 year warranty. This power inverter has two GFCI outlets and can use the GP-DC-KIT2 to connect to your batteries with ease. As long as the load is not greater then 600 watts this inverter will run it. The GP-SW600-24 can surge to 860 watts. All instructions are provided.
- 600 Watt Continuous Output
- Pure Sine Wave Output
- 24 Volt Input
- 860 Watt Surge
- 2 GFCI Protected Outlets
- Over Voltage, Under Voltage and Overload Protection
- 2 Year Warranty
Applications
A good choice for powering electronic equipment like TVs, stereos, computers and most medium-load electrical equipment, the Go Power!™ GP-SW600 is suitable for a range of applications:
- Mobile offices
- Recreational vehicles
- Fleet vehicles
Products specifications
|
Continuous Output Power
|
600 Watts
|
|
Surge Rating
|
860 Watts
|
|
Output Waveform
|
Sine Wave <3% THD
|
|
Output Voltage
|
115 VAC RMS ±3%
|
|
Output Frequency
|
50 / 60 Hz adjustable ±0.05%
|
|
Input Voltage
|
21.0 - 30.0 VDC
|
|
Efficiency
|
85 - 92%
|
|
No Load Current Draw
|
500 milliAmps (0.50 Amps)
|
|
Low Battery Alarm
|
21.0 VDC ± 2%
|
|
Low Battery Shutdown
|
20.0 VDC ± 2%
|
|
Storage Temperature Range
|
-30° - 70°C / -22°F - 158°F
|
|
Cooling
|
Temperature Controlled Fan
|
|
AC Receptacles
|
Dual GFCI Receptacle
|
|
Dimensions (L x W x H) MM
|
295 x 180 x 72
|
|
Dimensions (L x W x H) IN
|
11.6 x 7.1 x 2.8
|
|
Weight kg / lbs
|
2.7 / 5.9
|
|
Manufacturer's Warranty
|
2 Years
|
|
Inverter Install Kit
|
GP-DC Kit 2 (Sold Separately)
|
|
UPC
|
8-39085-00018-2
|
